| |
Specifications |
: |
It is odourless and environment friendly. Furthermore, due to its reduce absorptivity of the surface, the paint consumption is decrease. Due to silicone structure, it provides to surface vapour permeability and water impermeability. Due to it is performed bridge function between the topcoat paint with the surface, paint coat adheres well to surface. |
|
|
|
|
Technical Features |
: |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25°C) : 11 ± 3
Specific Gravity (g/ml) (20°C) : 1.00 ± 0.02
Solid Content (by weight) (%) : 11 ± 1
pH : 6.50 - 7.50
Theoretical Coverage : 25 m²/lt ( one coat, depending on the surface porosity and absorbency)
Practical Coverage : 0.03 0.05 lt/m² (one coat)
Recommended number of coats : one coat.
Drying Time (20°C) : Drying : 2 - 3 hours Topcoat paint application : 6 hours
Thin Down Ratio : 1 part primer is thinned with 1 part water.
|
|
|
|
Application 1 |
: |
All application surface must be sound, dry and clean
Old painted, blistered and dirty surface must be cleaned by scratching. If is putty necessary, Merbolin Exterior Putty should be applied to take sound and smooth surface and dried 12-24 hours. After than surface faults should be emerized and cleaned. |
|
|
|
Application 2 |
: |
After the surface preparation, 1 part Merbolin Silicone Medified Exterior Transparent Primer should be thinned with 1 part water by wolume and applied one or two coats depending on the surface porosity and absorbency, applied with brush, roller or paint gun . |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for two years. It should be protected from extreme heat, moisture and frost. |
|
|
|
Önemli Uyarılar |
: |
Primer must be mixed before the use.
The ambient temperature should be between 5 � 35 ° C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the primered surface must be protected during
24 hours, from chemical and physical factors.
Primer doesn�t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 22 : Harmful if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
|
