|
|
| |
Mode of Packing |
: |
0.750 l, 2.500 l and 15 l. |
|
|
|
|
Definition |
: |
It is a synthetic alkyd resin based, transparent, semi gloss and decorative wood protector. |
|
|
|
Color |
: |
According to colour card. |
|
|
|
Uses of... |
: |
It can be used reliable on all wood surface and garden forniture for decorative and protection purposeful. |
|
|
|
| |
Specifications |
: |
It protects the wood against mold, fungus, beetle and bedbug. It is fadeless, resists to scratch and abrasion. Due to it is silky matt, it gives to surface silky appearance and doesn�t prevent to breath of wood. |
|
|
|
|
Technical Features |
: |
Type of Resin : Alkyd resin
Viscosity (KU)(25°C) : 42 ± 5
Specific Gravity (g/ml) (20°C) : 0.90 ± 0.03
Solid Content (by weight) (%) : 46 ± 2
Glossy (60° - Gloss) : Silky matt
Flash Point ( °C ) : 38
Theoretical Coverage : 12 m ² / lt
Practical Coverage : 0,0800 - 0,100 lt/m² ( one coat ) 0,070 0,090 kg/m² ( one coat )
Recommended number of coats : Two coats.
Drying Time (20°C) : Touch dry : 1 - 3 hours Second coat application : 7 - 8 hours Dry through : 12 - 15 hours.
Thin Down Ratio : It is used directly, not need thinner.
|
|
|
|
Application 1 |
: |
All application surfaces must be clean, dry and free from dirt and oil. The surface should be sandpapered if it is necessary. All knots are burned and cleaned with Merbolin Cellulosic Thinner |
|
|
|
Application 2 |
: |
It is ready to use and not need thinner. After well mixing, Lux Merbotex Wood Protector should be applied with brush, roller or spray gun as two coat, allowing 6 - 8 hours between the coats. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5-35°C temperatures for three years. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
The Wood Protector must be mixed before the use.
The ambient temperature should be between 5�35°C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the surface must be protected during 3 days, from chemical and physical factors.
The Wood Protector doesn�t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 16 : Keep away from sources of ignition, no smoking. :
S 51 : Use only in well ventilated areas. :
|
|
