|
|
| |
Mode of Packing |
: |
0,500 kg, 0,900 kg, 3 kg, 4,5 kg, 9 kg and 18 kg |
|
|
|
|
Definition |
: |
It is an alkyd based, anticorrosive synthetic metal primer |
|
|
|
Color |
: |
White, grey, red and green |
|
|
|
Uses of... |
: |
It can be used as a primer, on iron and steel construction surfaces. It protects metal surfaces against rust |
|
|
|
| |
Specifications |
: |
It protects metal surfaces against rust. Due to it resists to all air condition, it can be used on surface of ship which is not contact with water. It forms strong surface for topcoat paints |
|
|
|
|
Technical Features |
: |
Type of Resin:Alkyd resin :
Viscosity (KU)(25°C):98 ± 2 :
Specific Gravity (g/ml) (20°C):1.68 ± 0.05 :
Solid Content (by weight) (%):81 ± 2 :
Glossy (60° - Gloss):Matt :
Flash Point ( °C ):38 :
Theoretical Coverage:16 m ² / lt ( 30 µ dry film thickness) :
Practical Coverage:0,070 – 0,085 lt/m² ( one coat ) :
0,115 – 0,145 kg/m² ( one coat ) :
Recommended number of coats:One or two coats :
Drying Time (20°C):Dust free : 3 - 5 hours :
Dry through: 10 - 12 hours. :
Thin Down Ratio:10 - 15 % (with Merbolin Synthetic Thinner.) :
|
|
|
|
Application 1 |
: |
The surface must be clean, dry, free from oil and rust.
Old and blistered paint coats should be cleaned and surface is sandpapered |
|
|
|
Application 2 |
: |
Boyalin Antirust is thinned with 10-15 % Merbolin Synthetic Thinner. Boyalin Antirust should be applied with brush, roller or paint gun as one or two coats, allowing 2 - 3 hours between the coats |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for three years. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
The antirust must be mixed before the use.
The ambient temperature should be between 5 – 35 ° C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the coated surface must be protected during
12 hours, from chemical and physical factors.
The antirust doesn’t empty into drains.
Application procedures defined above should be strictly observed |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. :
S 16 : Keep away from sources of ignition, no smoking. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 51 : Use only in well ventilated areas :
|
|
