| |
Specifications |
: |
It adheres well to surface, resists to heat until 400°C. It is anticorrosive primer paint which endures catodic protection and gives aluminium colour. |
|
|
|
|
Technical Features |
: |
Type of Resin : Silicone resin
Viscosity (KU)(25°C) : 95 ± 3
Specific Gravity (g/ml) (20°C) : 2.45 ± 0.05
Solid Content (by weight) (%) : 81 ± 1
Glossy ( 85° - Gloss ) : matt
Flash Point ( °C ) : >21
Heat Resistance (Dry) ( °C ) : 400
Theoretical Coverage : 25 m²/l; 10m²/kg (20µ dry film thickness )
Practical Coverage : 4 – 8 m²/kg (20-40µ dry film thickness)
Recommended dry film thickness : 20 – 30 µ
Recommended number of coats : one coat.
Drying Time (20°C) : Touch drying : 30 60 min. Drying : 8 - 10 hours Second coat application : 24 hours Full Hardening : 24 hours later to working temperature.
Thin Down Ratio : It should be thinned with Merbolin Heat Resistance Paint Thinner 5 % by weight.
|
|
|
|
Application 1 |
: |
The surface should be cleaned by sand blasting Sa 2½. All application surface must be clean, dry and free from rust and old paint layers. |
|
|
|
Application 2 |
: |
Merbolin Heat Resistance Aluminium Primer Paint should be thinned with Merbolin Heat Resistance Paint Thinner 5% by weight and applied with brush or paint gun. If second coat application is necessary, should be waited 24 hours between the coats. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for three years. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Primer paint must be mixed well before the use.
The ambient temperature should be between 5 – 35 ° C at the time of application
Application tools must be cleaned with Merbolin Heat
Resistance Paint Thinner, after the application,.
After the application, the painted surface must be protected during 24 hours, from chemical and physical factors.
The primer paint doesn’t empty into drains.
Application procedures defined above should be strictly observed |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 16 : Keep away from sources of ignition, no smoking. :
S 51 : Use only in well ventilated areas. :
|
