|
|
| |
Mode of Packing |
: |
0.750 l, 2.500 l and 12 kg. |
|
|
|
|
Definition |
: |
It is an urethane alkyd resin based, one component, parquet varnish. |
|
|
|
Color |
: |
Colourless, transparent. |
|
|
|
Uses of... |
: |
It can be used reliable on surface parquet, floor tile, mosaic etc... |
|
|
|
| |
Specifications |
: |
It protects the surface against detergent, alcohol, oil, tea and soft drink material. It is applied easily, resists to scratch and abrasion. It is glossy parquet varnish, which forms flexible film layer on surface. |
|
|
|
|
Technical Features |
: |
Type of Resin : Urethane alkyd resin
Viscosity (KU)(25°C) : 65 ± 5
Specific Gravity (g/ml) (20°C) : 0.90 ± 0.03
Solid Content (by weight) (%) : 50 ± 2
Colour (Gardner) : Max. 10
Glossy (60° - Gloss) : Min. 85
Flash Point ( °C ) : 38
Theoretical Coverage : 18 m ² / lt (30 µ dry film thickness )
Practical Coverage : 0,075 - 0,100 lt/m² ( one coat ) 0,070 0,090 kg/m² ( one coat )
Recommended number of coats : Two or Three coats.
Drying Time (20°C) : Touch dry : 1 - 2 hours Dust Free : 2 - 3 hours Dry through : 24 hours.
Thin Down Ratio : It is thinned with 10% Merbolin Synthetic Thinner at first coat application.
|
|
|
|
Application 1 |
: |
The application surface must be sound, dry and clean. Old and blistered varnish coats on surface of parquet should be cleaned by scratching and emerized. The polished surface of floor tile or mosaic must be clean free from wax coat. The parquet faults and spaces should be filled with Merbolin Super Putty or sawdust-varnish mixture, allowing 24 - 48 hours drying after than the roughs must be emerized. |
|
|
|
Application 2 |
: |
Merbolin Parquet Varnish is produced ready to use and is thinned with 10 - 15% Merbolin Synthetic Thinner at first coat application for well penetration to surface. It should be applied with brush or roller as two or three coats, allowing 5 - 6 hours between the coats. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5-35°C temperatures for three years. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
The varnish must be mixed before the use.
The ambient temperature should be between 5 � 35 ° C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the varnished surface must be protected during 3 days, from chemical and physical factors.
The varnish doesn�t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 16 : Keep away from sources of ignition, no smoking. :
S 51 : Use only in well ventilated areas. :
|
|
