|
|
| |
|
Merbolin Silicon Modified Mat Inerior Paint |
|
|
|
|
|
|
|
|
| |
Mode of Packing |
: |
0.750 l, 2.5 l, 7.5 l and 15 l. |
|
|
|
|
Definition |
: |
It is an acrylic copolymer resin based, silicone modified matt, interior paint. |
|
|
|
Color |
: |
According to colour card. |
|
|
|
Uses of... |
: |
It can be safely used on interior surface of gypsum, plaster, concrete for decorative and protection purposeful. |
|
|
|
| |
Specifications |
: |
It is water based, matt, interior paint which has high opacity, water permeability, odourless and environment friendly. Its antibacterial characteristics prevents formation of mould and fungus. |
|
|
|
|
Technical Features |
: |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25°C) : 134 ± 3
Specific Gravity (g/ml) (20°C) : 1.48 ± 0,03
Solid Content (by weight) (%) : 59 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3
pH : 8.00 � 9.00
Theoretical Coverage : 13 m² /lt ; 9 m²/kg (30 µ dry film thickness)
Practical Coverage : 0,085 � 0,100 lt/m² ( one coat )
0,125 � 0,150 kg/m² ( one coat ) :
Recommended number of coats : Two coats.
Drying Time (20°C) : Drying : 2 - 3 hours
Full drying: 24 hours :
Thin Down Ratio : 25 - 30 % ( with water )
|
|
|
|
Application 1 |
: |
All application surfaces must be sound, dry and clean
Old painted, blistered and dirty surface must be cleaned by scratching
and puttied with Merbolin Interior Putty to take sound and smooth surface. After putty application, the surface should be primed with Merboizolan Insulation Primer as one coat. |
|
|
|
Application 2 |
: |
Astar uygulamasından 2 - 3 saat sonra Merbolin Mat Silikonlu İç Cephe Boyası % 25-30 su ile ( hacimce ) inceltilerek yüzeye iki kat halinde fırça veya rulo ile tatbik edilir. Katlar arasında 2 - 3 saat beklenmelidir. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for two years. It should be protected from extreme heat, moisture and frost. |
|
|
|
Önemli Uyarılar |
: |
Paint must be mixed before the use.
The ambient temperature should be between 5 � 35 ° C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn�t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 22 : Harmful if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
|
|
