|
|
| |
|
Merbolin silicone modified textured exterior paint |
|
|
|
|
|
|
|
|
| |
Mode of Packing |
: |
25 kg. |
|
|
|
|
Definition |
: |
It is an acrylic copolymer emulsion resin based, silicone modified, matt, textured exterior coating. |
|
|
|
Color |
: |
According to colour card. |
|
|
|
Uses of... |
: |
It can be safely used on exterior surface of concrete, plaster and mineral substrate for decorative and protective purposeful. |
|
|
|
| |
Specifications |
: |
Due to the silicone structure, it has high water vapour permeability and low water absorption. It adheres well to applied surface, no crack, resists against friction, washing. It is water based, silicone modified, textured exterior coating, which has high opacity, unfading colors. It is resistant to water, moisture, sunlight and bad effects of salty moisture in the seaside. |
|
|
|
|
Technical Features |
: |
Type of Resin : Acrylic copolymer - Silicone Emulsion
Viscosity (KU)(25°C) : 135 - 140 ( when thinned %5 with water)
Specific Gravity (g/ml) (20°C) : 1.80 ± 0.01
Solid Content (by weight) (%) : 84 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3
pH : 8.00 - 9.00
Theoretical Coverage : 2 m²/lt
Practical Coverage : 1 1.5 kg/m²
Recommended number of coats : one coat.
Drying Time (20°C) : Drying : 1 - 2 hours Full drying : 24 hours
Thin Down Ratio : 5 - 10 % ( with water- by volume )
|
|
|
|
Application 1 |
: |
All application surface must be sound, dry and clean
Old painted, blistered and dirty surface must be cleaned by scratching and puttied Merbolin Exterior Putty to take sound and smooth surface. After putty application, the surface should be primered with Merbolin Silicone Modified Exterior Primer or Merboizolan Insulation Primer as one coat. In addition, the product itself can be used as a pimer when thinned with 50% water. |
|
|
|
Application 2 |
: |
2 - 4 hours after primer application, Merbolin Silicone Modified Textured Exterior should be applied for the large motives apply without dilution, for the fine motives apply dilute 5-10% (by volume) with water and applied as one coat with a roller. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for two years. It should be protected from extreme heat, moisture and frost. |
|
|
|
Önemli Uyarılar |
: |
Paint must be mixed before the use.
The ambient temperature should be between 5 35 ° C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 22 : Harmful if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
|
|
