| |
Specifications |
: |
It has excellent abrasion resistance and chemical material resistance. Due to its mechanical resistance is high, it forms a long-lasting film on surfaces. Because of including specific additives, it provides order and security for roads by reflecting light. |
|
|
|
|
Technical Features |
: |
Type of Resin : Vinyl - Epoxy Resin / Polyamide Hardener
Viskozite (KU)(25°C) : 85 ± 5 (I. Komponent)
Specific Gravity (g/ml) (20°C) : 1.40 ± 0.05 (Mix)
Glossy : Semi matt.
Solid Content (by weight) (%) : 64 ± 2
Solid Content (by volume) (%) : 48 ± 2
Flash Point ( °C ) : 22
Heat Resistance (Dry) ( °C ) : 100
Theoretical Coverage : 1.25 m²/l ( 350 - 400 µ dry film thickness)
Practical Coverage : 1 m²/kg ( 350 - 400 µ dry film thickness)
Mixing Ratio (by weight) : I. Component : 85 / II. Component (Hardener): 15
Pot Life (20°C) : 6 - 8 hour.
Drying Time (20°C- Relative Humidity 65%) : Touch : Max. 2 hours Full Drying : Max. 8 hours.
Thin Down Ratio : Epoxy Road Paint Thinner 5-10 % by weight.
|
|
|
|
Application 1 |
: |
All application surface must be clean, dry and free from oil. |
|
|
|
Application 2 |
: |
Vinyl-Epoxy Road Paint and hardener components should be mixed well observe to mixing ratio. 5-10 minutes waited after components mixing, Depending on application method and ambient temperature Merbolin Vinyl-Epoxy Road Paint is thinned with Merbolin Vinyl-Epoxy Road Paint Thinner 5-10 % by weight and applied on surface with brush, roller or special line machine. The paint mixture have to use within maximum 6 hours. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for one year. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.
The ambient temperature should be between 5 – 35 ° C at the time of application
Application tools must be cleaned with Merepoks Epoxy Thinner, after the application,.
Paint doesn’t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. :
S 16 : Keep away from sources of ignition, no smoking. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 51 : Use only in well ventilated areas. :
|
