|
|
| |
|
Merbolin waterproofing coating |
|
|
|
|
|
|
|
|
| |
Mode of Packing |
: |
1 kg , 3 kg and 20 kg. |
|
|
|
|
Definition |
: |
It is an acrylic copolymer resin based, waterproofing coating. |
|
|
|
Color |
: |
White |
|
|
|
Uses of... |
: |
It can be safely used on surface of roof, terrace, ground and basement walls for water isolation and impermeability. |
|
|
|
| |
Specifications |
: |
It doesn’t include solvent and asphalt, which is an environment friendly and water based isolation material. Furthermore, due to the elastomeric structure, it adheres to surface well and no cracks. It can be applied horizantel and vertical coats on surface of plaster, concrete, brick etc... |
|
|
|
|
Technical Features |
: |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25°C) : 134 ± 3
Specific Gravity (g/ml) (20°C) : 1.42 ± 0.03
Solid Content (by weight) (%) : 66 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3 ( mat )
pH : 8.00 – 9.00
Practical Coverage : 0.6 kg /m² (two coats application on vertical surface) 1.5 kg /m² (three coats application on horizontal surface)
Recommended number of coats : 2 or 3 coats.
Drying Time (20°C) : Touch drying : 1 - 2 hours Drying : 3 - 4 hours
Thin Down Ratio : For primer coat: Thinned with 40% water. For other coats: Used directly, doesn’t thin.
|
|
|
|
Application 1 |
: |
All application surfaces must be sound, dry and clean
Old and blistered layers on surface must be cleaned by scratching |
|
|
|
Application 2 |
: |
Merbolin Waterproofing Coating is thinned with 40% water, stirred well and should be applied with brush or roller for primer coat. Depending on the weather temperature and allowing 12-24 hours between the coats, it should be applied two or three coats. Each layer should be applied on the surface in reverce direction |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for two years. It should be protected from extreme heat, moisture and frost. |
|
|
|
Önemli Uyarılar |
: |
Waterproofing coating must be mixed before the use.
The ambient temperature should be between 5–35°C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the coated surface must be protected during
3 days, from chemical and physical factors.
Waterproofing coating doesn’t empty into drains.
Application procedures defined above should be strictly observed |
|
|
|
Danger Warning |
: |
R 22 : Harmful if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
|
|
