|
|
| |
|
Merbolite exterior coating |
|
|
|
|
|
|
|
|
| |
Mode of Packing |
: |
15 l. |
|
|
|
|
Definition |
: |
It is thermoplastic resin based, solvent borne, flat or texture, matt, elastic exterior coating |
|
|
|
Color |
: |
According to colour card. |
|
|
|
Uses of... |
: |
It can be safely used on exterior surface of concrete, plaster, mineral substrate etc... for decorative and protection purposeful. |
|
|
|
| |
Specifications |
: |
It resist against all atmospheric conditions and long life. It is waterproof and high water permeablity. It resists against friction, washing and sunlight. It colors are unfading. |
|
|
|
|
Technical Features |
: |
Type of Resin : Thermoplastic resin
Viscosity (KU)(25°C) : 105 - 110 (when thinned 5% Thinner)
Specific Gravity (g/ml) (20°C) : 1.60 ± 0.05
Solid Content (by weight) (%) : 78 ± 2
Glossy ( 85° - Gloss ) matt :
Flash Point : 46 °C
Practical Coverage : 0.050 - 1.00 kg/m² 0.35 - 0.65 l/m² (Depending on motive)
Recommended number of coats : Two coats.
Drying Time (20°C) : Drying : 2 - 3 hours Full drying : 24 hours
Thin Down Ratio : 10 - 15 % ( with water- by volume )
|
|
|
|
Application 1 |
: |
All application surface must be sound, dry and clean.
Old painted, blistered and dirty surface must be cleaned by scratching and puttied Merbolin Exterior Putty to take sound and smooth surface. After putty application, Merbolite Exterior Coating itself can be used as a primer coat when thinned with 50 % Merbolite Thinner. |
|
|
|
Application 2 |
: |
24 hours after the application of primer coat, Merbolite Exterior Coating should be applied for the large motives apply without dilution, for the fine motives apply dilute 10-15 % with Merbolite Thinner and applied as one coat with a roller. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for two years. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Paint must be mixed before the use.
The ambient temperature should be between 5 35 ° C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
|
|
