|
|
| |
Mode of Packing |
: |
0.750 l, 2.500 l and 15 l. |
|
|
|
|
Definition |
: |
It is an urethane alkyd resin based, one component, glossy varnish. |
|
|
|
Color |
: |
Colourless, transparent. |
|
|
|
Uses of... |
: |
It can be used reliable on wooden surface like interior or exterior of building, furniture and sea vehicles |
|
|
|
| |
Specifications |
: |
It has lasting gloss properties and high filling capacity. It protects the surfaces against sunlight, sea and exterior effects. It is fadeless and elastic wood varnish. |
|
|
|
|
Technical Features |
: |
Type of Resin : Urethane alkyd resin
Viscosity (KU)(25°C) : 65 ± 5
Specific Gravity (g/ml) (20°C) : 0.90 ± 0.03
Solid Content (by weight) (%) : 50 ± 1
Glossy (60° - Gloss) : Min 85
Flash Point ( °C ) : 38
Theoretical Coverage : 18 m ² / lt (30 µ dry film thickness )
Practical Coverage : 0,070 - 0,090 lt/m² ( one coat ) 0,060 0,080 kg/m² ( one coat )
Recommended number of coats : Two coats.
Drying Time (20°C) : Touch dry : 15 - 30 min. Dust free : 1.5 - 2 hours Dry through : 24 hours.
Thin Down Ratio : Application with brush or roller : It doesn't thinSpray application : It is thinned with 10% Merbolin Synthetic Thinner.
|
|
|
|
Application 1 |
: |
The application surface must be sound, dry and clean. Old and blistered varnish coats should be cleaned by scratching and sandpapered. All knots on new wooden surface are burned and cleaned with Merbolin Cellulosic Thinner. The surface is saturated with Merbotex Wood Protector. |
|
|
|
Application 2 |
: |
Merbomarin Yacht Varnish should be applied as two or three coats, allowing a day between the coats. It is thinned with 10 % Merbolin Synthetic Thinner for spraying equipment application and doesn�t thin for brush or roller application. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5-35°C temperatures for three years. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
The varnish must be mixed before the use.
The ambient temperature should be between 5 � 35 ° C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the varnished surface must be protected during 3 days, from chemical and physical factors.
The varnish doesn�t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 16 : Keep away from sources of ignition, no smoking. :
S 51 : Use only in well ventilated areas. :
|
|
