|
|
| |
|
Merbosoft water based satin paint |
|
|
|
|
|
|
|
|
| |
Mode of Packing |
: |
2.5 l, 7.5 l and 15 l. |
|
|
|
|
Definition |
: |
It is an acrylic copolymer resin based, silky glossy interior paint. |
|
|
|
Color |
: |
According to colour card. |
|
|
|
Uses of... |
: |
It can be safely used on interior surface of gypsum, plaster, concrete for decorative and protection purposeful. |
|
|
|
| |
Specifications |
: |
It is a water based, silky glossy interior paint, which has high opacity, wipeable, flexible, odourless and environment friendly. |
|
|
|
|
Technical Features |
: |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25°C) : 125 � 130
Specific Gravity (g/ml) (20°C) : 1.30 ± 0,03
Solid Content (by weight) (%) : 58 ± 2
Glossy ( 60° - Gloss ) : 31 ± 5
pH : 8.00 � 9.00
Theoretical Coverage : 14 m² /lt ; 11 m²/kg (30 µ dry film thicknes
Practical Coverage : 0,080 � 0,090 lt/m² ( one coat ) 0,100 � 0,120 kg/m² ( one coat )
Recommended number of coats : Two coats
Drying Time (20°C) : Drying : 4 � 6 hours Full drying : 24 hours
Thin Down Ratio : 10 % ( with water )
|
|
|
|
Application 1 |
: |
All application surfaces must be sound, dry and clean
a ) Old painted surface : Old and blistered coats should be cleaned by scratching. Surface of painted with water based paint should be puttied with Merbolin Interior Putty to take sound and smooth surface. The surface of painted with synthetic paint should be sandpapered with large motive sandpaper and cleaned. After than surface is primered with Merbolin Convertor Primer. 12 hours after the primer application, the surface is puttied with Merbolin Interior Putty to take sound and smooth surface.
b ) New Surface : The surface defaults are removed by scraper and puttied with Merbolin Interior Putty. After putty application; the surface is sandpapered and primered with Merboizolan Insulation Primer as one coat. |
|
|
|
Application 2 |
: |
2 � 3 hours after primer application, Merbosoft Water Based Satin Paint which is applied with brush or roller, is thinned with 10 % water. It should be applied as two coats, allowing 6 � 8 hours between the coats. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for two years. It should be protected from extreme heat, moisture and frost. |
|
|
|
Önemli Uyarılar |
: |
Paint must be mixed before the use.
The ambient temperature should be between 5 � 35 ° C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn�t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 22 : Harmful if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
|
|
