| |
Specifications |
: |
It is applied on concrete surface under the epoxy paint. The surface is saturated by this product which obtains strongly to adhesion between paint and surface. |
|
|
|
|
Technical Features |
: |
Type of Resin : Coal Tar -Epoxy Resin / Polyamide Hardener
Specific Gravity (g/ml) (20°C) : 0.90 ± 0.05
Glossy : Semi matt.
Solid Content (by weight) (%) : 23 ± 1
Solid Content (by volume) (%) : 20 ± 1
Flash Point ( °C ) : 22
Heat Resistance (Dry) ( °C ) : 150
Theoretical Coverage : 5-6 m²/l; 6 m²/kg ( 35 µ dry film thickness)
Practical Coverage : 4-7 m²/kg ( 25 - 50 µ dry film thickness)
Mixing Ratio (by weight) : I. Component : 75 / II. Component (Hardener): 25
Pot Life (20°C) : 8 - 12 hour.
Dry film thickness (one coat application) : 15 - 25 µ
Drying Time (20°C- Relative Humidity 65%) : First drying : 1 - 2 Drying : 2 - 4 hours Second coat application : 24 hours Full hardening : 7 days
Thin Down Ratio : Due to it produced at application viscosity, it is not need thinner.
|
|
|
|
Application 1 |
: |
All application surface must be clean, dry and free from oil. |
|
|
|
Application 2 |
: |
Epoxy Sealer and hardener components should be mixed well observe to mixing ratio. 5-10 minutes waited after components mixing, Merepoks Epoxy Sealer is applied on surface with brush or roller as one or two coats, allowing 24 hours between the coats. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for one year. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.
The ambient temperature should be between 5 – 35 ° C at the time of application
Application tools must be cleaned with Merepoks Epoxy Thinner, after the application,.
Paint doesn’t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. :
S 16 : Keep away from sources of ignition, no smoking. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 51 : Use only in well ventilated areas. :
|
