| |
Specifications |
: |
It can be used as a primer or topcoat.It adheres well to surface. Due to having high solid and low solvent, any problem aren’t consisted on old paint surface. One coat application be able to obtain thick film.Because of it formed strongly film, it gives good resists to abrasive or impact strength. |
|
|
|
|
Technical Features |
: |
Type of Resin : Epoxy Resin / Polyamide Hardener
Specific Gravity (g/ml) (20°C) : 1.45 ± 0.05
Glossy : Semi matt.
Solid Content (by weight) (%) : 87 ± 2
Solid Content (by volume) (%) : 80 ± 1
Heat Resistance (Dry) ( °C ) : 140
Theoretical Coverage : 5.5 m²/kg ( 100 µ dry film thickness)
Mixing Ratio (by weight) : I. Component : 75 / II. Component (Hardener): 25
Pot Life (20°C) : 2 – 3 hours.
Recommended wet film thickness : 125 - 130 µ
Dry film thickness (one coat application) : 100 µ
Drying Time (20°C- Relative Humidity 65%) : First drying : 2 - 3 hour Drying : 10 - 12 hours Full hardening : 7 days
Thin Down Ratio : Depending on application method; it should be thinned with Merepoks Epoxy Thinner 5-10 % by weight.
|
|
|
|
Application 1 |
: |
Sand blasting Sa 2½ or Sa 3. All application surface must be clean, dry and free from oil. |
|
|
|
Application 2 |
: |
Epoxy Surface Toleration Paint and hardener components should be mixed well observe to mixing ratio. 5-10 minutes waited after components mixing, Merepoks Epoxy Surface Toleration Paint is applied on surface with brush, roller or airless paint gun as one or two coats, allowing 10 to 12 hours between the coats. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for one year. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.
The ambient temperature should be between 5 – 35 ° C at the time of application
Application tools must be cleaned with Merepoks Epoxy Thinner, after the application,.
Paint doesn’t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. :
S 16 : Keep away from sources of ignition, no smoking. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 51 : Use only in well ventilated areas. :
|
