| |
Specifications |
: |
It protects the primer paint against external factors, also preparing suitable surface for the topcoat paint. The colour of the epoxy undercoat paints should be chosen suitable with topcoat epoxy paint colours |
|
|
|
|
Technical Features |
: |
Type of Resin:Epoxy Resin / Polyamide Hardener :
Specific Gravity (g/ml) (20°C):1.45 ± 0.05 :
Glossy:Semi matt, Matt :
Solid Content (by weight) (%):70 ± 2 :
Solid Content (by volume) (%):52 ± 2 :
Flash Point ( °C ): 22 :
Heat Resistance (Dry) ( °C ): 140 :
Theoretical Coverage:14.5 m²/l; 10 m²/kg ( 35 µ dry film thickness) :
Practical Coverage:5-10 m²/kg ( 25-50µ dry film thickness) :
Mixing Ratio (by weight):I. Component : 85 / II. Component (Hardener): 15 :
Pot Life (20°C):8 – 12 hours :
Recommended wet film thickness:70 – 115 µ :
Dry film thickness (one coat application):30 - 50 µ :
Drying Time (20°C- Relative Humidity 65%):First drying: 30 minutes.Drying: 1 - 2 hours Second coat application: 14 –16 hours Full hardening: 7 days :
Thin Down Ratio:Depending on application method; it should be thinned with Merepoks Epoxy Thinner 5-10 % by weight :
|
|
|
|
Application 1 |
: |
It is applied on primered surface. All application surface must be clean, dry and free from oil. |
|
|
|
Application 2 |
: |
Epoxy Primer Paint and hardener components should be mixed well observe to mixing ratio. 5-10 minutes waited after components mixing, Merepoks Epoxy Undercoat Paint is applied on surface with brush, roller, air atomized or airless spray gun as one or two coats, allowing 16 hours between the coats. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for one year. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Two components must be mixed well.The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.The ambient temperature should be between 5 – 35 ° C at the time of application Application tools must be cleaned with Merepoks Epoxy Thinner, after the application,.Paint doesn’t empty into drains.Application procedures defined above should be strictly observed |
|
|
|
Danger Warning |
: |
R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed :
|
|
|
|
Emergency Warning |
: |
S 2: Keep out of the reach of children. :
S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. :
S 16 : Keep away from sources of ignition, no smoking. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 51 : Use only in well ventilated areas :
|
