| |
Specifications |
: |
Due to not including any solvents, it doesn’t have any hazard like explosion and flame. It is resistance to acidic ambiance and water contact. |
|
|
|
|
Technical Features |
: |
Type of Resin : Coal Tar -Epoxy Resin / Polyamide Hardener
Specific Gravity (g/ml) (20°C) : 1.55 ± 0.05
Glossy : Gloss, in the long time tend to get matt.
Solid Content (by weight) (%) : 92 ± 2
Solid Content (by volume) (%) : 85 ± 2
Flash Point ( °C ) : 22
Heat Resistance (Dry) ( °C ) : 100
Theoretical Coverage : 4 m²/l; 3 m²/kg ( 200 µ dry film thickness)
Practical Coverage : 2-2.5 m²/kg ( 200 - 250 µ dry film thickness)
Mixing Ratio (by weight) : I. Component : 94 / II. Component (Hardener): 6
Pot Life (20°C) : 1 hour.
Dry film thickness (one coat application) : 200 - 500 µ
Drying Time (20°C- Relative Humidity 65%) : First drying : 3-4 hour Drying : 24 hours Second coat application : 24 hours Full hardening : 7 days
Thin Down Ratio : Thinner addition is not recommended.
|
|
|
|
Application 1 |
: |
Metal surface should be sand blasted Sa 2 or Sa 2½. All application surface must be clean, dry and free from oil. |
|
|
|
Application 2 |
: |
Epoxy Coal Tar Paint and hardener components should be mixed well observe to mixing ratio. 5-10 minutes waited after components mixing, Merepoks Solventfree Epoxy Coal Tar Paint is applied on surface with brush, roller or airless spray gun as one or two coats, allowing 24 hours between the coats but this time not much than 2 days. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for one year. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.
The ambient temperature should be between 5 – 35 ° C at the time of application
Application tools must be cleaned with Merepoks Epoxy Thinner, after the application,.
Paint doesn’t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. :
S 16 : Keep away from sources of ignition, no smoking. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 51 : Use only in well ventilated areas. :
|
