| |
Specifications |
: |
Due to doesn’t include solvent, it doesn’t have any hazard like explosion and flame. It produce according to food regulations. After using of epoxy paint, it doesn’t change the water properties like odour, delicacy. |
|
|
|
|
Technical Features |
: |
Type of Resin : Epoxy Resin / Polyamide Hardener
Specific Gravity (g/ml) (20°C) : 1.50 ± 0.10
Glossy : Gloss
Solid Content (by weight) (%) : 99 ± 1
Solid Content (by volume) (%) : 98 ± 1
Heat Resistance (Dry) ( °C ) : 140
Theoretical Coverage : 3.3 m²/l; 2.2 m²/kg ( 300 µ dry film thickness)
Practical Coverage : 1.8 m²/kg ( 300 µ dry film thickness)
Mixing Ratio (by weight) : I. Component : 70 / II. Component (Hardener): 30
Pot Life (20°C) : 8 – 12 hours.
Recommended wet film thickness : 70 – 110 µ
Dry film thickness (one coat application) : 30 - 50 µ
Drying Time (20°C- Relative Humidity 65%) : First drying : 1 - 2 hour Drying : 12 hours Full hardening : 7 days
Thin Down Ratio : Thinner addition is not recommended.
|
|
|
|
Application 1 |
: |
Metal surface should be sand blasted Sa 2 or Sa 2½. All application surface must be clean, dry and free from oil. |
|
|
|
Application 2 |
: |
Epoxy Paint and hardener components should be mixed well observe to mixing ratio. 5-6 minutes waited after components mixing, Merepoks Solventfree Epoxy Topcoat Paint is applied on prepared surface with brush, roller or airless spray gun as one or two coats, allowing 24 hours between the coats. The mixture of coating must be used in 1 hour. Nozzle Type : 0.027-0.029" Spray Angle : 60 – 80 ° Spray application pressure : Min. 200kg/cm³ (2800psi)(Nozzle pressure) |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for one year. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.
The ambient temperature should be between 5 – 35 ° C at the time of application
Application tools must be cleaned with Merepoks Epoxy Thinner, after the application,.
Paint doesn’t empty into drains.
Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. :
S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 51 : Use only in well ventilated areas. :
|
