| |
Specifications |
: |
It is epoxy primer paint, which contains non toxic pigment and resists to chemical materials and protects the metal surface against corrosion. |
|
|
|
|
Technical Features |
: |
Type of Resin : Coal Tar -Epoxy Resin / Polyamide Hardener Specific Gravity (g/ml) (20°C) : 1.50 ± 0.05 Glossy : matt. Solid Content (by weight) (%) : 76 ± 2 Solid Content (by volume) (%) : 58 ± 2 Active Corrosion Inhibitor in total solids (by weight) (%) : 22 ± 1 Flash Point ( °C ) : 22 Heat Resistance (Dry) ( °C ) : 140 Theoretical Coverage : 16.5 m²/l; 11 m²/kg ( 35 µ dry film thickness) Practical Coverage : 6-12 m²/kg ( 25 - 50 µ dry film thickness) Mixing Ratio (by weight) : I. Component : 85 / II. Component (Hardener): 15 Pot Life (20°C) : 8 - 12 hour. Dry film thickness (one coat application) : 30 - 50 µ Drying Time (20°C- Relative Humidity 65%) : First drying : 30 min. Drying : 1 -2 hours Second coat application : 14 - 16 hours Full hardening : 7 days Thin Down Ratio : Depending on application method; it should be thinned with Merepoks Epoxy Thinner 5-10 % by weight.
|
|
|
|
Application 1 |
: |
Sand blasting Sa 2 or Sa 2½. All application surface must be clean, dry and free from oil. |
|
|
|
Application 2 |
: |
I. ve II. Komponentler karışım oranına dikkat edilerek birbirleriyle karıştırılıp, 5-10 dakika dinlendirildikten sonra; fırça, havalı veya havasız tabanca ile bir veya iki kat halinde, katlar arasında 16 saat beklenerek tatbik edilir. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures for one year. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
Two components must be mixed well. The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage. The ambient temperature should be between 5 – 35 ° C at the time of application Application tools must be cleaned with Merepoks Epoxy Thinner, after the application,. Paint doesn’t empty into drains. Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. : R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. : S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. : S 16 : Keep away from sources of ignition, no smoking. : S 24 / 25 : Avoid contact with skin and eyes. : S 29 : Do not empty into drains. : S 46 : If swallowed, seek medical advice immediately and show container or label. : S 51 : Use only in well ventilated areas. :
|